How Much Cutrine Plus Per Gallon Of Water
How Much Cutrine Plus Per Gallon Of Water. Make a dump of copper sulfate into the irrigation ditch or lateral at ¼ to 2 pounds per second of water per treatment. For a low density growth of green water algae, for example, use 0.6 gallon of.
Cyanobacteria, green algae, golden algae. Dilute 1 part cutrine plus to 9 parts. Product label | sds sheet.
Apply Cutrine Plus Liquid Algaecide With A Sprayer At A Rate Of 0.6 To 1.2 Gallons Per Acre Foot Of Water When Algae Begins To Grow And Water Is Over 60°F.
Follow the product's label directions. For 1 gal of cutrine, mix 9 gal water. For 1 qt cutrine, mix 2.25 gal water.
Repeat About Every 2 Weeks As Needed.
Use 4 gallons per surface acre 3 ft. This dosage treats 2,500 sq. 3 gallon sprayer sold here.
Cyanobacteria, Green Algae, Golden Algae.
Dilute 1 part cutrine plus to 9 parts. Spray directly on affected areas. Mix 1 quart cutrine plus liquid and 2 gallons of tap water in a tank sprayer.
Product Label | Sds Sheet.
For small backpack sprayer applications, use a 9:1 dilution ratio (1 gallon of cutrine plus to 9 gallons of water) or a 50:1 dilution ratio when using water pump equipment. Dilute with at least 9 parts water and apply as a surface spray. Application rates vary by algae type, infestation level and pond size.
Dilute With A Minimum Of 9 Parts Water.
Cutrine® plus algaecide and herbicide effectively controls a broad range of algae, specifically surface filamentous and planktonic algae including: Available in 1 gallon (4 units per case), 2.5 gallon (2 units per case), 5 gallon, 30 gallon, 55 gallon and 275 gallon containers (units for larger sizes) double chelated elemental copper. Make a dump of copper sulfate into the irrigation ditch or lateral at ¼ to 2 pounds per second of water per treatment.
Post a Comment for "How Much Cutrine Plus Per Gallon Of Water"